10Ton Double girder remote control electric traveling gantry crane with electromagnetic plate
Product description of 10Ton Double gantry crane with electromagnetic plate
The MC Type Electromagnetic Double Girder Gantry Crane is mainly composed of Portal steel structure,lifting trolley,magnet system,cabin and cable and electrical control equipment, etc.
Steel structure is mainly composed of main beam, legs,ground beam, connecting beam, accessories and so on. The main beam adopts double main beam rectangular section, and the track is laid on the plane of the main beam for the trolley to run. The legs adopt box type variable section, and the legs are connected with the main beam by flange bolts.
The crane traveling mechanism has 8 wheels in total, 4 walking wheels on both sides of the track. The main girders of the crane are equipped with walking platform, protective railings and protective plates meet the corresponding national standards.
The power supply of the crane is AC 380V 50Hz or customized voltage,power supply system can be cable and cable drum or air bus bar system. Trolley adopts festoon cable and I beam cable pulley. The crane is also equipped with overload protection and the limit switch of each mechanism and other safety protection devices.
There are full field of view Cabin suspend under the main girder, there are joint control desk installed in the Cabin, The main girder joint with the two side end carriage with welding joint.
Some configuration of MC type Double girder Magnetic gantry crane can accord your demand:
1). Long Life Span: 20-30 years;
2). Steel Material: Q235B and Q345B;
3). Trolley rail is made of high strength hot rolled flat steel (16 Mn)
4). Epoxy zinc-rich painting,120μm thick, to achieve a long lifespan, beautiful appearance and good luster
5). Control method is cabin control or remote control;
6). Maintenance walkway is located on both sides of the main girder, consisting of flower pattern plate, 1050mm handrail.
7). Crane is equipped with all moving limit switch, loading limit and other standard safety devices, to promise crane work safe.
8).Heavy working duty from A6-A8
9). With magnetic/magnet under the crane as the lifting tool, to lift steel scrap, steel material and so on.
10). Soft start, 3-5 speeds to operate, very stable to lift and running.
11). Six direction action, to make sure the enough wide working area.
12. Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection,Short-circuit protection
Phase sequence protection
Zero position protection
Voltage loss protection
Limit switch and stopper for crane long traveling and cross traveling
Lifting overhigh and overlow limit switch
Control method:
Pendant Control, remote control, cabin control
Design and construction rules:
All the standards which is required for the U type Double girder hook gantry crane is the Chinese standard
Painting:
Primer and finishing paint
Color: according to your demand.
Product Picture:
Product technical parameters:
| Lifting weight(T) | 5 | 10 | 16/3.2 | 20/5 |
| Span(m) | 18~35 |
| Max Lifting height(m) | Main Hook | 13 |
| Auxiliary Hook | 15 |
| Working class | A6,A7 |
| Speed(m/min) | Main Hoisting | 10 |
| Aux hoisting | 15 |
| Trolley Cross Traveling | 35 |
| Crane Long Traveling | 40 |
| Motor Type | Heavy duty slip ring motor |
| Motor (Kw) | Main Hoisting | 15,22,37 |
| Trolley Cross Traveling | 15,22,37 |
| Crane Long Traveling | 2*6.3,2*8.5,2*11 |
| Control mode | Remote control,Cabin control |
| Recommended Rail model | 30kgs/m | 38kgs/m | 43kg/m |
| Power source | 3Ph A.C 50Hz 380V |
Main product of Henan Mine Crane
Henan Mine Crane meet the demand factory, workshop, port, mining, waste disposal, goods scattered, petrochemical, aerospace, military and other industries of universal bridge crane, overhead crane, eot crane, door crane, universal gantry crane, rubber tyre and rail mounted container gantry crane, four link type portal crane, quayside container crane, crane, crane hook, mining grab crane, gantry crane, ship loader, grab bucket ship unloader, stacker reclaimer, dredger, mobile platforms and other types of hydraulic crane.
We have passed CE, GOST, SGS, and OHSAS & ISO9001:2000 international quality control,ISO14001:1996 environment and ISO9001:2001 health and safety certifications. We have a perfect quality-control system, a strict management system, and strong production capability and advanced testing measures to ensure the high production and high quality.
Product Tags:
|
|
10Ton Double Girder Electric Traveling Gantry Crane With Electromagnetic Plate Images
|
