Electric single-girder crane is a CD1 or MD1 type electric hoist matching. It is a light and small crane running on rails. The working environment temperature is in the range of -20-60 degrees Celsius. This type of crane has the characteristics of small size, compact structure, light weight, beautiful appearance, convenient operation and maintenance, and is an ideal equipment for material handling in workshops and warehouses.
LDA single girder overhead crane is designed to cover a wide range of modern industrial demands, providing excellent value for money with no compromise on performance.
Product Techncial Parameters of 5ton Single Girder Overhead Crane with Electric Hoist
| Capacity | t | 3 | 5 | 10 | 16 | 20 |
| Span | | 7.5~31.5m |
| Speed | Hoisting | m/min | 8. 8/0.8 | 7. 7/0.7 | 3.5, 3.5/0.35 | 6. 6/0.6 |
| Travelling of crab | 20 |
| Travelling of crane | Surface | 20(30) | 20 |
| Cabin | 20(30) | 20 |
| Electric hoist | Type | CD1-3 MD1-3 | CD1-5 MD1-5 | CD1-10 MD1-10 | CD1-16 MD1-16 | HC20T |
| Lifting height | m | 6,9,12 | 6,9,12,18 | 9,12 | 9,12 | 9,12 |
| Working class | | A3~A5 |
| Power supply | | 3-phrase 50HZ 380V |
Safety Features of 5Ton Single Girder Overhead Crane with Electric Hoist
1). Overload limiter
2). Overcurrent protection,Short circuit protection.
3). Lifting limit switch,cross and long traveling limit switch
4). Gravity limit switch
5). Phase squence protection,Zero position protection.
6). Emergency stop button
7). Voltage loss protection.
Photos of 5Ton LDA Single Girder Overhead Crane with Electric Hoist
Sketch of 5Ton Single Girder Overhead crane with Electric Hoist for sales 
Product configuration sheet of 5ton Single girder overhead crane with electric hoist for sales:
| Configuration details of the EOT Crane: |
| Steel plate | Anyang/ Handan Q235 steel |
| Hoist lifting motor | Large starting torque conical rotor Squirrel cage motor with disc brake |
| Trolley traveling motor | Soft starting Squirrel cage with disc brake |
| Crane traveling motor | Soft starting Squirrel cage with disc brake |
| Hoist lifting reducer | 3-level helical gear type, gear and axles are of alloy steel or quailty carbon steel,reducer cover is of cast-iron |
| Trolley traveling reducer | Involute gear reducer LD type |
| Crane traveling reducer | Involute gear reducer LD type |
| Wheel | 50# steel forged wheel, Annealing to stress relief, mid-frequency quenching for tread and flange surface,low tempering After heat treated,Tread and flange surface hardness reach HB300~380 |
| Bearing | Luoyang |
| Brake | Built in brake |
| Wire rope | High strength wire rope 6x37+FC1770 |
| Hook | Forged 20Mn high strength material forged hook |
| Main Electrical parts | SCHNEIDER |
| Trolley power supply | Festoon cable |
| Control mode | Pendent line control |
| Control panel | YES |
| Cable | Crane industry special cable YC or YVFB type, bear temperature up to 60’C |
| Buffer | High quality polyurethane buffer |
| Painting | Manual brush painting,One alkyd iron red primer painting, two alkyd orange enamel finish painting |
| Safe features of the EOT Crane: | |
| Weight overload protection device | √ |
| Emergency stop system | √ |
| Over current Protection,Short-circuit Protection | √ |
| Phase sequence protection, Zero position protection,No-Voltage protection | √ |
| Mechanical interlock protection of controller | √ |
| Limit switch for crane long traveling | √ |
| Stopper and Limit switch for trolley cross traveling | √ |
| Lifting up and lower down limit switch | √ |
| High quality polyurethane buffer for crane long traveling protection | √ |
Company Information:
Henan Mine Crane Co.,Ltd is the largest industrial crane manufacturer in China since 2002. Main products are Electric hoist/Overhead crane/Gantry crane/Grab crane/Magnet crane/Ladle Lifting crane/Explosion proof crane/Container gantry crane/European type crane and hoist /Electric Winch,Jib crane,Scissor Lift/Crane components.
Our company has 4500staffs,1420000m2 workshop area,3500sets of various advanced equipments,yearly sales 100000sets of crane and hoist, ISO,CE etc certifications, cranes are exported to 120countries.
In Pakistan,we have supplied our cranes to Abbas Steel Group,Almoiz industries Ltd,Fareed Engineering works.
Besides Pakistan,we also supplied our cranes to India,Bangladesh,Philippines,Uzbekistan,Cameroon,Egypt,Ethiopia,Nigeria,Morocoo,Algeria.
Certifications:
We have passed CE, GOST, SGS, and OHSAS & ISO9001:2000 international quality control, ISO14001:1996 environment and ISO9001:2001 health and safety certifications.
We have a perfect quality-control system, a strict management system, and strong production capability and advanced testing measures to ensure the high production capacity and high quality cranes.
